Loading... Please wait...

Categories

NpH pH/ORP Input Node

Hover over image to zoom

  • Image 1
Lakewood Instruments
$495.00
SKU:
NpH
Weight:
1.00 LBS

 Product Description

The Node pH (NpH) is a single channel of pH or ORP input to a 2000 series controller. A maximum of four NpH options can be used. A pH or ORP sensor must be ordered separately. The NIN option card is required for operation.

The Model NPH pH and ORP Node is a LONWORKS®-compatible node that uses twisted pair communications. The NPH works with several different temperature compensation inputs and with pH or ORP sensors. These multiple-sensor input options allow for various sensors to be used. Temperature compensation is adjustable by pH per Celsius for use with various processes. Up to four NpH nodes may be installed on the 2000 series controller.

One Network Interface Node (NIN) per 2000 Series Controller is required to operate network nodes such as the NDIG, and contain Rel 98 Firmware. All controllers shipped after 1 June 98 will have Rel 98 firmware.

Relay configuration and datalogging.

After a NpH is installed, not only will you be able to view additional inputs you will also be able to datalog information and control relays based on the external device. 

  
For additional information, and choosing the correct controller for your application, please review
the pdf Product Cut Sheet, and 
the pdf Owner's Manual Sheet.

If you have any questions or need assistance in selecting the correct controller for your application,
please don't hesitate to contact
EnviroAqua at (818) 890-3200.

For quotes or special requests please contact EnviroAqua toll free at (800) 853-0311.



 

 Find Similar Products by Category

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

 

newsletter

Copyright 2018 EnviroAqua Mega Store. All Rights Reserved.
Sitemap | site by Counterintuity